Options Tips for The Average Joe

A Guide to Tree Removal

Tree removal is a difficult task and it is not as simple as cutting its trunk. This is for the simple reasons that most trees are not straight trees which you can simply cut and dig up. Reasons for cutting a tree maybe due to damages done by a storm, or a tree blocking access to a place or the tree is simply being a general nuisance to the place.

If you are going to fell a tree, it is important to check the surrounding area first. IF you observe power lines near the tree location, or if you are living on a hill or near a cliff, then it is best to call professional tree removal services to cut the tree for you. You can do the tree cutting yourself if the area surrounding it is clear, and if you are on flat ground. Just remember that tree removal takes time and that there is a need for proper tools, before beginning your tree removal project. You will also need two escape routes on both sides of the tree that you will use later on.

Your first cut is the undercut. This will guide the tree to fall. You will cut it in a V shaped notch in the side that you want the tree to fall on. Cut a notch of 90 degree angle and cut it to one fourth of the diameter of the trunk.
Looking On The Bright Side of Experts

Next you need to do the backcut. This cut should be done two inches higher than the undercut’s hinge part. This should be done on the opposite side of the trunk, the side you don’t want it to fall on. This cut helps to release the stress on the tree and it helps the tree to fall easily.
Lessons Learned About Professionals

Go to your escape routes out of the path of the falling tree when it starts to fall. When the tree is safe on the ground you can return back to your work.

Next you need to take out the limbs, by the process called limbing. In this task, you need to take off the branches and this is done from the bottom up. Your position should be on the opposite side of the trunk from the branch you are cutting. Tree trunks are usually stored for firewood and so you should start cutting it according to the desired lengths. If you want to deliver the branches for recycling, you should cut them to the required size according to your bylaws and bundle them up for pickup.

Let the professionals remove the stump. There is still a lot of work to be done since there is still a lot of tree parts under the ground that are not visible on ground. You can call your tree removal services which offer professional tree removal , tree trimming, stump grinding, and other services.